Solutions

Automatic ballooning of engineering drawings

Load the PDF drawing and get a numbered list of its requirements. Ai-Inspect detects dimensions, tolerances, feature control frames and datum flags, balloons them, and then links each balloon to the CAD geometry so that it can be measured on a scan.

Four stages on one screen

The Drawing Inspector works in four stages — drawing, recognition, link to the model, program and report — with an action panel that changes with the stage. Vector PDFs are read from their own geometry and text; scanned drawings are supported as well.

  • Dimensions and tolerances, hole callouts included
  • Feature control frames with their datum references and modifiers
  • Datum flags and unequal profile zones
  • General-tolerance notes (ISO 2768) read from the drawing

Your customer's balloon numbers stay

When the drawing already has balloon rings, they are detected and adopted verbatim, so the report uses the numbers your customer knows. A drawing without balloons is numbered automatically, and every balloon keeps a record of how it was detected.

From a balloon to a measurement

Views, sections and details of the drawing are registered against the CAD's hidden-line projection, tilted sheets included. A balloon whose feature is identified this way is linked automatically and shows the evidence for the link.

A balloon that only matches a CAD dimension by its value is not linked automatically; it becomes a 'confirm the candidate' task. The linked plan is then written out as a measurement program.

Offline by default

Recognition runs on the workstation. An optional cloud AI layer can review the drawing; it is a separately licensed module that has to be enabled, and its suggestions pass through the same geometric gates as everything else.

Questions and answers

PDF — vector or scanned.

No. Recognition runs locally. The drawing is sent to a cloud model only when the optional Cloud AI module is licensed and switched on.

It is a licensed add-on. Licences are perpetual and locked to a workstation, and the module is switched on in the licence file.

See it on your own parts

Send us a note and we will run a live, remote demo on your kind of parts — your drawing, your CAD model and a scan.

  • Live and remote, at a time that suits your time zone
  • On your own drawing, CAD model and scan
  • A reply within one business day