Capabilities

A complete 3D metrology workflow

Every tool a quality team needs to align, measure, analyze and report — in one professional suite.

AI Drawing Inspector

Load the PDF drawing — Ai-Inspect detects dimensions, GD&T frames and datums, balloons them (or adopts your customer's balloons) and builds the inspection plan in four stages.

  • Automatic detection of dimensions, tolerances, GD&T frames and datum flags
  • Customer balloon numbers adopted verbatim; auto-ballooning with a per-balloon audit trail otherwise
  • AUTO only from proof: every automatic link carries its evidence; value-only matches become 'confirm the candidate' tasks
  • Views, sections and details registered against the CAD's hidden-line projection
  • Reads general-tolerance notes (ISO 2768) straight from the drawing
  • Optional cloud AI review — always behind the same geometric gates
Module page

Plane Grid — Flatness & Straightness per Length

A numbered lattice on any planar, cylindrical or conical face: flatness, flatness per area and straightness per line and per length, with sketches and a full point table.

  • Lattice centred on the face outline — whole face, regions, edge strips or a band around the closed contour
  • Exact minimum-zone flatness; straightness per length such as 0.2 / 30 with the worst window drawn
  • Automatic rows / columns or hand-picked lines joined along the lattice; every line becomes a real line element
  • Cylinders and cones: wrapped lattice, cylindricity / conicity, circularity per ring
  • Scan missing under a point → N/A with the reason (no surface, slope, island) — never a value
  • Recorded step: the same balloon numbers on every part of the series
Module page

Wall Thickness Grid — Three Rays per Point

Thickness under every grid point, read through the material and compared with the CAD nominal on the same ray — from a single scan of both sides.

  • Near surface, far surface through the material and CAD nominal, all on one ray per point
  • Nominal from the drawing value or face-to-face on the CAD, analytic on cylinders and cones
  • One-sided tolerances (minimum wall only), Cp/Cpk when both limits exist
  • Single-sided scans, oblique far faces and missing CAD back faces are refused per point with the reason
  • Min / Max / Mean rows plus per-point rows with stable balloons; histogram and grid sketch in the PDF
Module page

Profile with Unequal Zones (U / UZ)

Profile of a surface or line with bilateral, ASME Ⓤ or ISO UZ zones — the material side taken from the CAD, and the zone diagram in the plot.

  • Bilateral ±t/2, Ⓤ upper = +v / lower = −(t−v), UZ offset zones — one source for every consumer
  • Sign = material side, proven on the closed CAD solid; unprovable sign is refused, not assumed
  • Signed deviation map on the fitted plane, zone diagram and histogram attached to the row and to the report
  • Section Profile wizard offers the same U / UZ selector per requirement
Module page

MMC / LMC Bonus & One Datum Frame

True position judged once — declared zone plus the material-condition bonus — in the same datum frame used for coordinates and profile.

  • Bonus from the measured size, hole or shaft side read from the CAD; conflicting callouts refuse the bonus and judge as RFS
  • Reported as zone + bonus, e.g. 0.080 (+0.050 Ⓜ), in the table, PDF, CSV, Excel and PAS
  • Position projected perpendicular to the element's own axis — radial holes included
  • One datum frame for TP, coordinate rows and profile: the frame a CMM program would build
  • Roundness plot with LSC / MZC / MIC / MCC circles for every circularity result
Module page

Measurement Copilot — Precision by Refusal

After a program run the Copilot shows what was measured, what was refused and why, and walks the operator through the open items one at a time.

  • Phase stepper: summary → datums → gaps → FAIL review → finish
  • Candidates from a closed set, highlighted on the model; the operator always confirms
  • Re-run through the same measurement engine — the Copilot never measures on its own
  • Skip with a reason, re-measure, undo; every action recorded into the program
  • Run report + red marks on the model for every unmeasured balloon
Module page

Surface Best-Fit with DOF Locks

Refine the scan pose on the CAD faces you click, lock any degree of freedom, and get a named coordinate system — or a refusal with the free axes spelled out.

  • Whole B-rep faces on STEP, crease-bounded regions on STL
  • Conditioning gate: an under-constrained selection is refused with the free DOFs named
  • Capture stage for scans that start outside the fit band
  • Before / after RMS per face; saved as a coordinate system with Undo; replays in the program
Module page

Auto Alignment

A dedicated module: one-click automatic scan-to-CAD alignment, plus RPS, ICP, Point-Pair and thin-part refinement.

  • Point-Pair, ICP (Iterative Closest Point) and RPS (3-2-1) methods
  • One-click Auto Alignment with symmetry breaking and a pose guard for round / symmetric parts
  • Coarse → Medium → Fine → thin-part refinement pipeline
  • Refine-to-Datums locks the Datum Reference Frame before GD&T
  • Handles multi-million point scans smoothly
Module page

Full GD&T Engine

Every ASME Y14.5 / ISO 1101 characteristic with multi-datum reference frames, MMC/LMC bonus and live previews.

  • Flatness, Circularity, Cylindricity, Perpendicularity, Parallelism, Angularity
  • True Position, Profile, Runout, Total Runout, Concentricity, Symmetry
  • Multi-datum DRFs (A|B|C) with material condition modifiers
  • Feature-aware dialogs: only valid characteristics are offered per element
  • Live preview before committing — see the result, then add it
Module page

Color Deviation Map

Full-surface color map with CPK / SPC statistics, smart balloons and interactive point picking.

  • Deviation gradient with adjustable tolerance bands
  • CPK and SPC statistics (Cp, Cpk, skewness, kurtosis)
  • Smart auto-decluttered balloons linked to the measurement table
  • Interactive point picking with live PASS/FAIL judgment
  • Branded surface-profile PDF reports at 300 DPI
Module page

DMIS Translator

The core workflow: run existing CMM DMIS programs directly on a 3D scan — CAMIO, PC-DMIS and PAS dialects supported.

  • Multi-dialect parser: PAS, CAMIO 2025, PC-DMIS and generic DMIS 5.x
  • Synthesizes measurement points from nominals when the program has none
  • Datum-frame transforms replicate the physical CMM alignment
  • Validated end-to-end against real CMM result files
  • Exports the familiar PAS CMM report format
Module page

Cross-Sections & Section Profile

Cut the part anywhere — axis, angle or through any plane element — then dimension the 2D section like a drawing view.

  • Interactive 2D section editor with CAD-style dimensioning tools
  • Section Profile module: ISO 1101 profile audit of scan vs CAD contour per section
  • Parametric section series ('every N mm along the axis') in one run
  • Best-fit circles, PCD construction, wall thickness, angles and deviation probes
  • Section snapshots embedded directly in the final report
Module page

Macro & Batch Automation

Record an inspection once — replay it as a true measurement program on every part, or run a whole folder in batch.

  • Record / edit / replay full inspection programs
  • Smart macro editor: enable/disable steps, bulk tolerance & balloon edits
  • True re-measurement on replay — not a stored-numbers playback
  • Batch mode: auto-align and inspect a folder of scans unattended
  • Automatic PDF/CSV/PAS reports per part
  • Run report after every program: which balloons were not measured and why, marked on the model
Module page

AI Assistant Pro

An autonomous measurement agent you command in plain language — runs fully offline, with an optional cloud upgrade.

  • Agentic loop: plans, measures, checks results and continues until done
  • Natural-language commands in Hebrew, English and Russian
  • Offline engineering KB: GD&T, ISO 286 fits, threads, materials, SPC
  • Runs locally on a model matched to your hardware — data never leaves the machine
  • Optional Anthropic Claude cloud provider (explicit opt-in, licensed module)
Module page

Scan Tool — Automatic Scan Stitching

Automatic scan stitching: auto-align multiple partial scans to each other, merge, clean, fill holes and edit interactively.

  • Auto-align all scans with symmetry-aware, feature-scored registration
  • Merge scans into a single watertight mesh
  • Interactive editing: brush selection, plane cut, hole filling, outlier removal
  • Undo/Redo, PLY/OBJ/VTK/STL import & export
  • PAS CMM COM integration
Module page

Report Designer — Automatic FAI Reports

Branded PDF / CSV / Excel / HTML reports with balloon ordering, editable results, PAS export and automatic FAI generation.

  • Automatic FAI (First Article Inspection) report generation
  • Drag-and-drop report designer with live editing of nominal / tolerances / balloons
  • Automatic balloon-ordered output (including 1_1, 1_2 instance suffixes)
  • Mixed mm / inch units, 300 DPI, A4 professional templates
  • Section-profile pages with per-section images
  • PAS CMM CSV export that loads directly into PAS
  • Live PDF preview, snapshots placed in the report, operator notes and instrument columns
Module page

Datums & Coordinate Systems

Build, store and switch local coordinate systems live; datums survive CS switches and replay correctly in programs.

  • Coordinate System Registry with live switching
  • Build LCS / DRF from planes, circles, points, slots and construction elements
  • RPS alignment manager with per-axis constraints and residuals
  • Refine-to-Datums emulation of the physical CMM alignment
  • Import / export coordinate systems for CMM compatibility
Module page
Get started

See it on your own parts