DMIS Translator
Your CMM programs, running on scans.
The bridge between your CMM and your scanner: take the DMIS program that already runs on your CMM — PAS, CAMIO or PC-DMIS dialect — and execute it directly on a 3D scan. The translator reconstructs datum alignments, synthesizes measurement points where the program defines none, and produces the same report your CMM would.
Key capabilities
- Multi-dialect: PAS, CAMIO 2025, PC-DMIS, generic DMIS 5.x (UTF-16 aware)
- Datum-frame transforms emulate the physical CMM alignment
- Validated end-to-end against real CMM .RES result files
- Frame-registration gate: a datum frame that cannot be verified is flagged for confirmation before PLAY — never assumed
- Program repair tools and a full smart macro editor
In detail
DMIS Translator
The core workflow: run existing CMM DMIS programs directly on a 3D scan — CAMIO, PC-DMIS and PAS dialects supported.
- Multi-dialect parser: PAS, CAMIO 2025, PC-DMIS and generic DMIS 5.x
- Synthesizes measurement points from nominals when the program has none
- Datum-frame transforms replicate the physical CMM alignment
- Validated end-to-end against real CMM result files
- Exports the familiar PAS CMM report format
Recent changes
All release notes- Version 8.38.1
DMIS import: one path for every window
The program editor, the batch window and the AI command import a DMIS program through the same code: encoding detection (UTF-16 programs included), frame registration against the CAD and a named refusal for a file without steps. Import warnings are stored with the program and shown again when it is reopened. A sphere declared with seven numbers is read from the numbers themselves or refused by name; a centre-of-gravity point is measured over all its touches; INCH programs are converted throughout.
Where this module is used
Questions and answers
Yes. The DMIS translator parses PAS, CAMIO and PC-DMIS dialects, reconstructs the datum alignments, synthesizes measurement points where the program has none, and replays the program on the scan. It has been validated end-to-end against real CMM result files.
It depends on the tolerances and on the scanner. A scan captures whole surfaces at once and feeds GD&T, colour maps, sections and grids directly; features whose tolerance is tighter than what the scanner can resolve still belong on a touch probe, and Ai-Inspect refuses them with a 'resolution limited' reason rather than reporting a number. Many teams run both — the same DMIS program on the CMM and on the scan — and let the refusals decide what stays on the CMM.
See this module on your own parts
Send us a note and we will run a live, remote demo on your kind of parts — your drawing, your CAD model and a scan.
- Live and remote, at a time that suits your time zone
- On your own drawing, CAD model and scan
- A reply within one business day
More modules
- Inspection Workspace & Auto Alignment
- AI Drawing Inspector
- Analysis Suite — Plane Grid, Wall Thickness & Section Profile
- GD&T Engine
- Measurement Copilot
- Cross-Sections & Section Profile
- Macro, Batch & Duplicate
- AI Assistant Pro
- Scan Tool — Automatic Scan Stitching
- Report Designer — Automatic FAI Reports
- Datums, RPS & Coordinate Systems
- Offline Programming Mode
- Surface Best-Fit