Included

Inspection Workspace & Auto Alignment

One workspace: align the scan to the CAD, color-map it, measure it.

Load the nominal CAD (STEP/IGES/STL) and the scan, align them with one click and inspect in a single workspace with Align, Inspect and Drawing pages: full-surface color deviation map with CPK/SPC statistics, automatic feature measurement (planes, circles, cylinders, cones, spheres, slots, lines), construction geometry, and smart 3D balloons that stay readable even on parts with thousands of elements. Two pose guards watch the alignment — a flipped symmetric pose and an offset pose into the wrong surface basin are both detected and shown with evidence, never applied silently.

Key capabilities

  • One-click Auto Alignment with symmetry breaking + RPS / Point-Pair / ICP
  • Pose guards: symmetric and offset poses detected and shown with evidence — never applied silently
  • Manual move / rotate dialog: six axes, quick steps, arrow keys, saved as a coordinate system with Undo
  • AutoFeature: click a face — get the measured feature with its CAD nominal
  • 16 construction modes (PCD, intersections, midplanes, projections, cylinder from circles…)
  • Smart declutter keeps thousands of balloons readable
  • Undo for every element, measurement, GD&T result and datum (Ctrl+Z)

In detail

Auto Alignment

A dedicated module: one-click automatic scan-to-CAD alignment, plus RPS, ICP, Point-Pair and thin-part refinement.

  • Point-Pair, ICP (Iterative Closest Point) and RPS (3-2-1) methods
  • One-click Auto Alignment with symmetry breaking and a pose guard for round / symmetric parts
  • Coarse → Medium → Fine → thin-part refinement pipeline
  • Refine-to-Datums locks the Datum Reference Frame before GD&T
  • Handles multi-million point scans smoothly

Color Deviation Map

Full-surface color map with CPK / SPC statistics, smart balloons and interactive point picking.

  • Deviation gradient with adjustable tolerance bands
  • CPK and SPC statistics (Cp, Cpk, skewness, kurtosis)
  • Smart auto-decluttered balloons linked to the measurement table
  • Interactive point picking with live PASS/FAIL judgment
  • Branded surface-profile PDF reports at 300 DPI

Recent changes

All release notes
  • Version 8.38.1

    Auto cone and auto sphere stay on the CAD face

    The sampling rings of an auto cone cover the trimmed CAD face that was clicked and nothing beyond it, so the answer does not depend on where you click. An auto sphere spreads its points evenly over the part of the sphere that exists in the CAD. When the scan does not cover the face the measurement is refused by name. Diameter and radius now accept a sphere: mean, minimum, maximum and sphericity.

  • Version 8.38.1

    A shorter measurement panel

    Panel areas that repeated an existing dialog are now one button or one menu — GD&T, datums and coordinate systems, manual move, RPS, measure, reports. A 'Full panel' switch brings every previous control back and the choice is remembered. Nothing was removed: recorded programs, AI tools and keyboard shortcuts work the same in both layouts.

  • Version 8.38.1

    Fewer pop-ups, visible state

    Messages that need no decision appear in the status bar instead of a window. An active pick mode shows a chip with its name and 'Esc to cancel'; Ctrl+S saves the project and Delete removes the selected rows. A numeric field with unreadable input is marked, and the measurement is refused by field name instead of being judged against a default.

  • Version 8.38.1

    Alignment screen: undo, residuals and cancel

    Every alignment step — point pairs, auto align, fine alignment — can be undone, up to twenty steps back. After picking pairs the residual of each pair and the RMS are shown in one line. Loading a nominal or a scan can be cancelled while the file is being read; the previous model stays exactly as it was.

Where this module is used

Guides on this topic

Questions and answers

Measurement accuracy is determined by your scanner — its stated accuracy, resolution and the quality of the scan (coverage, noise, calibration) — not by the software. Ai-Inspect evaluates exactly the geometry the scan contains and will not improve or degrade it. What the software guarantees is methodological: fits and GD&T follow ASME Y14.5 / ISO 1101, every nominal comes from the CAD model, and anything that cannot be proven on the scan (missing coverage, unverified datum frames) is refused and routed to manual review instead of being estimated.

Nominal CAD in STEP, IGES and STL; scans in STL, PLY, OBJ, VTK and VTP. Drawings as PDF (vector or scanned). Reports export to PDF, CSV, Excel and HTML, plus a PAS CMM CSV that loads directly into PAS.

No. Ai-Inspect is scanner-agnostic — any device that exports a mesh (STL, PLY, OBJ) works, including Creaform, GOM, Shining3D, Artec and others. The built-in Scan Tool can also align and merge multiple partial scans into one part.

See this module on your own parts

Send us a note and we will run a live, remote demo on your kind of parts — your drawing, your CAD model and a scan.

  • Live and remote, at a time that suits your time zone
  • On your own drawing, CAD model and scan
  • A reply within one business day

More modules