Solutions

First article inspection from a 3D scan

A first article inspection accounts for every design characteristic on the drawing. Ai-Inspect numbers the characteristics, measures them on the scan and exports one row per balloon with requirement, result and status — the characteristic accountability data an AS9102 Form 3 is filled from.

Plane Grid detail sheet — point number and value printed at every lattice point at the printed scale

Every characteristic gets a number

The Drawing Inspector reads the PDF drawing and detects dimensions, tolerances, feature control frames and datum flags. If the drawing already carries the customer's balloon numbers they are adopted as they are; otherwise the drawing is ballooned automatically. General-tolerance notes such as ISO 2768 are read from the drawing itself.

Each number is linked to geometry before it is measured

A requirement becomes an automatic measurement only when its link to the CAD geometry is proven: the drawing view is registered against the CAD's own projection and the feature is identified there. A requirement that matches by value alone becomes a task for the operator to confirm. Nothing is measured on a guess.

What the report contains

The report is ordered by balloon number, so it reads in the same order as the ballooned drawing.

  • One row per balloon, with instance suffixes such as 5_1, 5_2 for repeated features
  • Requirement, nominal, tolerance, measured value, deviation and status
  • Rows that were not measured stay in the report as N/A with the reason
  • A coverage page that checks the report against the balloons of the drawing
  • PDF, Excel, CSV and HTML export

Where AS9102 comes in

AS9102 defines three forms. Form 1 (part number accountability) and Form 2 (materials, special processes and functional tests) describe the part and its supply chain and are completed by your organisation. Form 3 (characteristic accountability) lists each design characteristic with its requirement and result — this is the data Ai-Inspect produces.

The Excel and CSV exports carry that data row by row, for transfer into your own Form 3 template or quality system. Characteristics the scan cannot support, and those verified by other means, stay visible as open rows to be completed with the instrument that measured them.

Questions and answers

It produces the characteristic results — number, requirement, measured value, status — as Excel, CSV and PDF. The forms, including Forms 1 and 2 and the signatures, remain your organisation's documents.

They are listed as N/A with the reason. The report designer has type and instrument columns, so a characteristic verified with a gauge or on the CMM can be documented in the same table.

The inspection is saved as a program and runs again on a new scan. Edits made in the report table — a nominal, a tolerance, a balloon number — sync back into the program.

See it on your own parts

Send us a note and we will run a live, remote demo on your kind of parts — your drawing, your CAD model and a scan.

  • Live and remote, at a time that suits your time zone
  • On your own drawing, CAD model and scan
  • A reply within one business day